Aspire Nautilus issue

I love my Aspire Nautilus,..  really amazing tank.  I have the big one and I only have to fill it about once a day or just over.  But, the replaceable atomizer got stuck in the tube (the non-threaded part).  I tried and tried to remove it, then my husband tried to take it out with some pliers, but the glass cracked!  I went ahead and ordered another one from hoosier (great deal at $27).  I know someone sells replaceable parts (for now just duct taping the crack and still can’t get the atomizer out).  Does anyone know where to get these replacements or if it is even worth it?  Very sad.  :(

Good E-Juice Calculator?

Alrighty, im still kinda new here. So please forgive me if this question has been asked countless times. Im looking for a good, accurate mixing calculator. Any suggestions? ive noticed some use measurements based on drops, and percentages. But, im interested in calculators that use measurements based on mL since I’ll be using syringes.

Are those Sony VTC4s from real?

Hi guys, I purchased my Sony VTC4s from RTD<a href="”> since many people recommended rtd <a href="”>vapor as a respected online vendor. Today I finally got them. Based on what I read from how to spot fake Sony batteries at <a href="http://www.sun-<a href="”>” target=”_blank” rel=”nofollow”>How to spot a fake Sony VTC5 battery, I am not sure if what I have got are authentic.

So to all the battery experts, could you please help me out? Much appreciated.

Here are the pictures.

<a href="<a href="”>vapor-com-real-img_0431.jpg” title=”Name: IMG_0431.jpg
Views: 2
Size: 17.5 KB”>IMG_0431.jpg

<a href="<a href="”>vapor-com-real-img_0432.jpg” title=”Name: IMG_0432.jpg
Views: 2
Size: 16.9 KB”>IMG_0432.jpg

<a href="<a href="”>vapor-com-real-img_0433.jpg” title=”Name: IMG_0433.jpg
Views: 2
Size: 17.6 KB”>IMG_0433.jpg
<a href="<a href="”>vapor-com-real-img_0434.jpg” title=”Name: IMG_0434.jpg
Views: 2
Size: 17.7 KB”>IMG_0434.jpg
<a href="<a href="”>vapor-com-real-img_0436.jpg” title=”Name: IMG_0436.jpg
Views: 2
Size: 18.3 KB”>IMG_0436.jpg

My concerns are,

1. The QR codes look too bright and dense.
2. The seem looks like what was in the fake one in the article, <a href="http://www.sun-<a href="”>” target=”_blank” rel=”nofollow”>http://www.sun-<a href="”>…Nasty-Seam.jpg

More pics in the next post since they only allow five in one post.

Attached Images
  • File Type: jpg
    <a href="<a href="”>vapor-com-real-img_0431.jpg”>IMG_0431.jpg
    (17.5 KB)
  • File Type: jpg
    <a href="<a href="”>vapor-com-real-img_0432.jpg”>IMG_0432.jpg
    (16.9 KB)
  • File Type: jpg
    <a href="<a href="”>vapor-com-real-img_0433.jpg”>IMG_0433.jpg
    (17.6 KB)
  • File Type: jpg
    <a href="<a href="”>vapor-com-real-img_0434.jpg”>IMG_0434.jpg
    (17.7 KB)
  • File Type: jpg
    <a href="<a href="”>vapor-com-real-img_0436.jpg”>IMG_0436.jpg
    (18.3 KB)

new user

Hey im looking to quit smoking because of insurance premiums at my job getting ready to double for tobacco users….. I have tried many over the counter gas station brands of e cigs and I can honestly say I have not found one that I like at all…. I smoke Marlboro reds and have smoked them ever since I have started at the age of 13. I will say I looooovvvvee a strong cig the stronger the better but I also like a really smooth cig I have absolutely no desire to quit smoking, I know that’s bad but I absolutely love smoking I need some information on where to get started on something that is similar to what I’m used to if there is anything that is similar to that I’m a pack and a half a day smoker and like I say the stronger the better thanks. Sorry about the grammar and punctuation I am typing on a cell and don’t do,great with them

Best sub-ohm build for flavor in an RDA/mech mod

I’ve been trying to figure out what build would be best for flavor. I’ve heard good things about micro-coils but I’m either doing something wrong or my expectations are too high.

I’ve played with normal dual coil builds around .2-.3 ohms around anywhere from a 3/32 – 1/8 inch bit. I love the warm dense <a href="”>vape but I feel like flavor could get even better. Tonight I tried a build on a 1/16" bit with 25 gauge with 7/8 wraps and ended up at .28 ohms. It <a href="”>vapes and tastes pretty good but I seem to get burnt hits very easily. Much quicker than my previous .3 build with (I think) 5/6 wraps on a 3/32 bit.

Am I doing something wrong with my micro coil builds or do you all recommend a different kind of build for flavor? I can’t build super high considering I like warm <a href="”>vapes and I’m on a mech.

FYI I’m using an authentic copper vanilla and a Tobeco Tohb. Usually only one air hole open on each side to keep the <a href="”>vape warmer and flavor better.

P.S. If there’s a thread about this already please point it out. I couldn’t find a good one.