I have a Volt kit (which I purchased after trying and hating the Blu kit). I’m pretty satisfied with it but I’ve been reading good things about using a tank/clearo vs. polyfill cartomizer. Since there are so many options out there, and want to make sure the device works with the specific setup that I have – does anyone one have an opinion on the best tank or clearo mizer to use for the Volt? Thanks.
Well I have to say a change in heat thats for sure. More heat Wooot!!!
IMEO YOU ARE A GOD!!! LOL
There was also a hand written thank you on my receipt IMO its the attention to detail that keeps customers and I will continue to do business with them.
For the RBA’s, I have the Phoenix clone from MOV. I also have their V3 Phoenix clone which differs a bit from the "regular" Phoenix. V3 looks nicer than the regular Phoenix and comes apart in 3 pieces which is nice.
I used Kanthal 32 and 34. I like the 32 better because being thicker it is easier to work with. I have 28 but haven’t used it.
I wrap my coils using the drill bit method outlined in the vertical coil thread. Usually 5-6 wraps for a target range of 1.7-2.5 ohms. Of course I check them with a multimeter before firing. Tried both vertical and horizontal coils…I don’t really have a preference, performance seems to be about equal either way. The vertical coil is easier to use on the regular Phoenix, and a horizontal coil is much easier on the V3.
I didn’t do any heat prep to my wire with a lighter, just dry burn a few times after installing the coil and before installing the wick. Haven’t noticed any taste issues that were related to the wire.
Started out using cheesecloth. Don’t know if it was the type of cheesecloth I was using (unbleached, etc) but the taste was terrible. Then went to 100% cotton yarn. Much better, but flavor seemed muted. Finally switched to 100% cotton sterile gauze and flavor (and <a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapor) has been outstanding. This is my favorite wick material so far. I had some SS mesh but I can’t seem to find it so I haven’t tried that out yet.
**I make my wicks about 2 inches long, but I’m not sure if this is too long or too short. I stuff the excess wick around the posts into the well, but I’m a little unclear on how much of the well should be full of wick. Anybody can chime in on this.
I found that the air hole position has a LOT to do with the amount of <a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapor you get. Definitely as others have suggested, make sure the air hole is in front of the coil, not being blocked by the posts. I opened my air hole up a bit with a Dremel bit, definitely improved the airflow and lessened the harsh throat hit. If you open it up too much just move some of your wick over in the direction of the air hole and it will tighten up the draw a little bit.
I really like the RBA’s. I like both the regular Phoenix and the V3. The V3 is prettier and works better for horizontal coils. Performance is equal on both. Really digging the sterile gauze as a wicking material. These are little beasts and for the price I don’t really see the point in using regular atomizers other than backups.
I was a bit frustrated at first when I wasn’t getting the performance, <a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapor, and flavor I was hoping for. But with a little practice and patience everything comes together. So don’t give up if you are frustrated!! Get good at wrapping coils, find a good wick material, and watch the position of that air hole. These things can be a bit finicky, but with a little love these things are beasts!!
Hope this helps anybody thinking about trying the RBA’s or who is new and frustrated. Stick with it! And if anybody else has any suggestions or would like to add anything please do.
That is awesome! Congrats on the 2 week mark! My oldest son switched easily in the same fashion…when he had to move back home for a bit. It is just easier to switch with other <a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapers around!
Statistics: Posted by <a href="http://www.ecigadvanced.com/forums/memberlist.php?mode=viewprofile&u=232″>Patthib — Fri Nov 30, 2012 11:36 pm
very frustrating. I want to give them my money, but nothing. Placed a ticket through contact page. No response. Can anyone help?
vaping ECBends Dragons Breath… after steeping forever and getting darker sooooo goood!!
Statistics: Posted by <a href="http://www.ecigadvanced.com/forums/memberlist.php?mode=viewprofile&u=2646″>tiffjamesnjj — Fri Nov 30, 2012 11:29 pm
Size: 13.3 KB”>christmas-lights.jpg
The Vapor Room
www.the<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vaporroom.net Very Marry Holiday sale!
Saturday, 12/1 at 12:00AM EST
to Saturday, 12/8 at 12:00PM EST
ALL STARTER KITS 10% OFF
The perfect gift for you, a friend, or family member!
Sunday, 12/9 at 12:00AM EST
to Saturday, 12/15 at 12:00PM EST
Sunday, 12/16 at 12:00AM EST
to Saturday, 12/22 at 12:00PM EST
FREE GROUND SHIPPING & 1/2 OFF PRIORITY
Save $4.00 with FREE Ground Shipping or 1/2 off Priority!
Three Days Only
Sunday, 12/23 at 12:00AM EST
to TUESDAY 12/25 at 12:00PM EST
15% OFF COUPON CODE
Give yourself a gift!
Check back in every week for more details on each weeks sale!
<a href="http://www.e-cigarette-forum.com/forum/attachments/<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapor-room/155910d1354335233-tvrs-very-merry-holiday-sale-month-christmas-lights.jpg” title=”Name: christmas-lights.jpg
Size: 13.3 KB”>christmas-lights.jpg
Refer a 1st time customer to TVR from December 1st through December 25th and receive an upgraded coupon code for a FREE 30ML instead of a 15ml!TO BE ELIGIBLE: The person you are referring must put your FULL NAME and EMAIL address in the comments at check out to receive your coupon code! (Note: Allow around a week to receive your coupon code via email.)
RULES: The referee must be a first time customer. The referee must use their own Account, Email Address, and Ship To Address. If the referrer’s account, email address, and Ship To Address is used the referrer will not be eligible for a coupon code. We cannot identify a new customer if a current customers information is used.
<a href="http://www.e-cigarette-forum.com/forum/attachments/<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapor-room/155911d1354335326-tvrs-very-merry-holiday-sale-month-gift-certificate.jpg” title=”Name: Gift Certificate.jpg
Size: 21.6 KB”>Gift Certificate.jpg
Want to give a friend or family member a starter kit for the holidays but your not sure which kit is best suitable for their needs? Not sure what Nicotine Strength a current <a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapor prefers? Email them a Gift Certificate so they get exactly what they want!
Dont let distance keep you from sending the perfect gift! Choose "Gift Wrap" option at check out and have your order mailed with a TVR Holiday Card with your own custom message and each item gift wrapped to perfection for ONLY $3.00!
Happy Holidays & Happy Vaping,
Josh & Jess
If anyone has any any it would be greatly appreciated.